Number of channels
Sampling rate (fs) / Level resolution
Bandwidth
Level range
Level accuracy @ 1 kHz
Level flatness
100 Hz ~ 10 kHz
20 Hz ~ 20 kHz
20 Hz ~ 80 kHz
Residual distortion @ level +25
to –20 dBVp (THD+N)
Residual noise
Phase accuracy (interchannel)
Internal frequency accuracy
Selectable input impedance per channel
Input impedance accuracy
Input impedance coupling
Phantom power voltage
Phantom voltage accuracy
Phantom power inward resistance
15V
Measurements
Option & Accessories
Phanton power voltage
Polarization Voltage
SP-72
SG-5001B
General
Standard software
Interface Bus
Main power requirements
Fuse
Operating temperature
Dimensions
Weight
<± 0.1 dB
<± 0.2 dB
<± 0.2 dB
2 channels with individual levels
192 kHz / 32bit DAC
20 Hz ~ 80 kHz
10mVRMS to 28VRMS
0.1 dB
94 dB
<± 0.1 dB
<± 0.1 dB
<± 0.2 dB
<± 0.2 dB
Log : 1/1,1/3,1/6,1/12,1/24,1/48 Octave steps
Lin : 1 to 2000 steps
<± 50 ppm
2 independent channels with individual input range
192 kHz / 32 bit
20 Hz ~ 80 kHz
-34 to +60 dBVp
<± 0.1 dB
<± 0.1 dB
<± 0.2 dB
<± 0.2 dB
<-86 dB
<-120 dB
± 1 deg @ 200 Hz ~ 4 kHz
± 50 ppm
1MΩ
1% of resistor value
AC Coupled
15 VDC
± 1 VDC
2.2 KΩ
[1] SPL (Sound Pressure Level) Frequency Response
[2] Total Harmonic Distortion / 2nd & 3rd Harmonisc Distortion
[3] Extraneous Noise (Rub&Buzz) Frequency Response
[4] Impedance Frequency Response
[5] Polarity (Phase Frequency Response)
[6] Impedance
[7] Fo, Ze (Resonance Frequency)
[8] L/R Comparison measurement
Connector type BNC 24 VDC, 48 VDC
Connector type 7 pin Lemo 200 VDC
Lemo ICP Adaptor
Remote Control
15P D-Type connector I/O signal - Start, Pass, Fail, Fail [Class1, Class2, Class3, Class4]
SPL Analyzer ON. Rub & Buzz Analyzer ON .
Remote control I/O ※ Terminal Box [Option 01A]
Audio Analyzer Production software (PC based Windows® XP, Vista, win7 )
Pentium®4, 1.5GHz processor minimum or equivalent.
(Celeron processors are not recommended)
Personal computer connected to the instrument
through the Audio Analyzer Interface Bus. (USB2.0)
AC 220-230V~ 50/60Hz 40VA
5 x 20 T LBC 630mA/250V Standard : EN10480
+ 5 to +45℃ ( +40 to +110 F ), R.H.<90% non condensing
485(W) * 95(H) * 256(D) mm (without Dimensions of Power Amp)